taper-in-thickness ratio

The influence of sweep angle and taper ratio on the characteristics of wingtip stalling is discussed.

讨论了后掠角和尖削比这两个机翼外形参数对翼尖失速特性的影响。

Due to the strong constraint from the base and the indenter, the size effect of micro-pillar strongly depends on the pillar geometry ( i.e. the pillar size, the ratio of pillar height to width and the taper), the slip plane orientation and so on.

由于基座和刚性压头的约束作用，微柱的尺度效应强烈地依赖于微柱几何（宽度、高宽比、锥度）和滑移面取向角等多种因素。

Evaluations are also made on taper equations and volume ratio equations being compared.

另外对所比较的削度方程和材积比方程作了评价。

The results showed the voidage ratio of taper spiral packing,θ-ring packing and metal gauze corrugated packing was 0.823:0.947:0.855, and under the same liquid sprayed density, the pressure drop ratio of unit height of packing layer was 0.58:1.10: 0.62.

流体力学性能测试中，锥度螺旋填料、θ环和丝网波纹填料三种填料的空隙率之比为：0.823：0.947：0.855时，在相同喷淋密度下，单位高度填料层压降之比却为：0.58：1.10：0.62。

Taper ratio and optimum value of taper-flat sector thrust bearing with double-side resistive oil edges posterior inclined plane appliance

双封油边斜&平面固定瓦推力轴承的最佳斜面比